- HP-DWT(SC) Dual Wall Tubing with Semi-Conductive Tubing outside
- 2017-12-16 14:41
- ■ Application: Heat shrinkable Semi-Conductive Insulation Tubing is dual wall heat shrinkable tubing which inner layer is made from insulation material to provide high insulation and external layer is made from semi-conductive materials to provide electri
- HP-DS-P06 Push-on full insulated Terminal
- 2017-12-04 11:54
- ■ Our Heat Shrink Push on Terminal is the heat shrinkable tubing made by polyolefin in milk color, this product could match tab terminal to use. Except the standard size,if you need some special size,we can also make it basing on your requirement.The prod
- HP-DS-F06 Fork Terminal
- 2017-11-22 23:47
- ■ Heat Shrink Fork Terminal pass the UL certificate,RoHS certificate,It is the heat shrinkable tubing made by polyolefin in milk color, with many different size fork terminal. It was developed specifically for wire protect and connect,we can produce accor
- HP-MWTA(PA) Medium wall shrink Tubing with Polyamide glue
- 2017-11-21 14:57
- ■ Application: It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.
- HP-DW(06) HDPE shrink Tubing for Terminal
- 2017-11-08 01:29
- ■ Application: HP-DW(06) is manufactured by co-extrusion of irradiated cross-linking polyolefin and specifically designed hot melt adhesive. It has excellent tensile strength, puncture resistance and waterproof properties. Specially designed for environme
- HP-ABox(DS,SST)-150 Shrink Terminal and Soldersleeve
- 2017-10-30 19:16
- ■ Application: HP-ABox(DS,SST)-150 is Assorted Plastic Box of HP-DS.It is customized minipacking, mainly for MRO (Mainterance Repairness Operation ) market.The heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from wat
- HP-DS-P106 Push-on Terminal
- 2017-10-29 06:28
- ■ Application: HP-DS-P106 the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and corrosion. Half part non shrink plug-in terminal providing strain relief and against vibration in rugged environments, whic
- HP-SST-300 Shrink Soldersleeve
- 2017-10-16 00:51
- ■Our heat shrink solder sleeve (RoHS) is one piece design, PE shrink tubing,with three solder ring,two same color glue ring,the solder in this kind of product is RoHS required.Soldersleeve provides insulation and lower the installed cost.We keep this prod
- HP-KY(175) PVDF Shrink Tubing (Kynar)
- 2017-09-20 00:28
- ■ Application: HP-KY(175) is clear, thin-wall, semi-rigid, flame-retardant heat-shrinkable tubing with both high temperature and chemical resistance. Especially suitable for applications requiring high temperature performance, outstanding abrasion resista
- HP-SLPT Self-locked protective tubing
- 2017-09-19 14:58
- ■ Application: Designed to provide reliable protecting for different cables such as power cables and meshwork of tunnel, suitablefor single-phase 50Hz/25KV alternating current. It can provide high resistance to tracking andarcing, as well as to enhance th
- HP-SST-SGRS-00 Solder Grip Device Stub Splice
- 2017-09-11 04:33
- ■Solder Grip Device Stub Splice (RoHS) is transparent insulation sleeve provides encapsulation, inspect, strain relief, and insulation,Pre-fluxed solder provides controlled soldering process,the solder in this kind of product is RoHS required.
- HP-SCS Self-locked protective tubing
- 2017-09-04 04:57
- ■ Application: HP-SCS Self Closing Braided Wrap is a non-expandable sleeve woven from monofilament (weft) and multifilament (warp) polyester yarns. It provides a lightweight, cost-effective and tough solution for the protection of a wide range of componen
- HP-MP-L Shrink Moulded Parts L Type
- 2017-08-30 03:53
- ■ Application: The heat shrinkable moulded sleeve mainly used in electrical cable terminal connection,the excellent properties of stress release, sealing and mechanical protection can provide excellent protection of cable terminal connection,cable bifurca
- HP-DS-PH06 Push-on half insulated Terminal
- 2017-08-29 02:12
- ■Our Heat Shrink Push on Terminal(half insulated)is the heat shrinkable tubing made by polyolefin in milk color, this product could match tab terminal to use. Half of this product is malt part,half of this product it polyolefin shrink tubing.To meet user
- HP-ABox(HST)C-170 Shrink Single Wall Tubing Color
- 2017-08-25 03:10
- ■ Application: HP-ABHP-ABox(HST)C-170 is Assorted Plastic Box of HP-HST. It is customized minipacking, mainly for MRO (Mainterance Repairness Operation ) market. HP-HST is flexible, flame-retardant polyolefin heat shrinkable tubing. It is low smoke genera
- HP-PTFE PTFE Sleeve
- 2017-08-22 05:19
- ■ Application: HP-PTFE Non-shrinkable Tubing is high temperature (260℃) resistance, flame-retardant tubing which has excellent electrical and physical properties, including excellent acid fastness and corrosion resistance. This tubing is suitable for insu
- HP-DS-NT06 Tab Terminal
- 2017-08-07 20:21
- ■ Our Heat Shrink Tab Terminal is the heat shrinkable tubing made by Nylon in clear color, this product could match push on full insulted terminal and push on half insulated terminal to use. At the same time all this kind of product is easy entry,which is
- HP-PVC PVC Tubing
- 2017-07-22 20:42
- ■ Application: HP-PVC Non-shrinkable Tubing is flexible, flame-retardant tubing which has excellent electrical and physical properties, including excellent acid fastness and corrosion resistance. This tubing is suitable for insulation use in automotive el
- HP-MP-I Shrink Moulded Parts I Type
- 2017-07-17 09:13
- ■ Application: The heat shrinkable moulded sleeve mainly used in electrical cable terminal connection,the excellent properties of stress release, sealing and mechanical protection can provide excellent protection of cable terminal connection,cable bifurca
- HP-HWTA Heavy wall Tubing with EVA glue
- 2017-07-08 13:42
- ■ Application: It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.
